STANDARD FEATURES

MODEL	AB30 HYDRO
120V DUPLEX 20A, 5-20R	1
CIRCUIT BREAKERS	YES
VOLTMETER	YES
SHAFT DIAMETER	.875"(22)
KEYWAY	.1875(4.7)
SHAFT ROTATION FROM PTO VIEW	BI-DIRECTIONAL
SHAFT SPEED RPM	3600
REQUIRED PULLEY (NOT SUPPLIED)	SINGLE

IMPORTANT - FOR INSTALLATION CONSULT OWNER'S MANUAL.
ALL MODELS DESIGNED FOR HORIZONTAL OPERATION ONLY.

	WATTS
MODEL	MAXIMUM	RATED	VOLTAGE	AMPS RATED	HERTZ	PHASE	WIRE	MINIMUM REQUIRED ENGINE H.P.	REQUIRED TORQUE FT-LBS	REQUIRED GENERATOR SHAFT RPM
AB30 HYDRO	3000	2400	120	20	60	1	4	5	7.5	3600

MODEL	NET			PACKAGED			NET WEIGHT	PACKAGED WEIGHT	CUBIC FT.
	L	W	H	L	W	H
AB30 HYDRO	16.125(41)	8.5(22)	10.5(27)	26.5(67)	15(38)	17.5(45)	40(18)	55(25)	4.0

CHANGES: All specifications and dimensions are subject to change without notice and there is no obligation to make changes in units previously sold. All units are manufactured to the highest engineering standards consistent with the industry.

GENERATOR SELECTIONS: When selecting generator be sure that the unit takes care of present total requirments and your anticipated needs. Motor loads require 3 to 4 times wattage (or amperage) ratings on nameplate.

RATINGS: Apply to altitudes up to 1000 feet, standard cooling, normal ambients and gasoline fuel. Reduce ratings 3-1/2% for each 1000 feet above sea level and 1% for each 10∞ Fahrenheit rise above 60∞ Fahrenheit. Connection of a generator to a home or building requires a transfer switch. Consult a qualified technician.


Copyright © 2010 Wanco Inc. All rights reserved. Disclaimer Information